Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light
Fenix SD20 Diving Light

Fenix SD20 Diving Light

£109.95
In Stock

  • Features Cree XM-L2 U2 white & XQ-E red LEDs
  • 1000 Max lumen output
  • Uses 4 x CR123 / 2 x 18650 battery

  • Add to Basket

    For commercial orders and large purchases, contact us at 02921157162, or

    Product Description
    Specification
    Package & Contents
    Product Description
    Fenix SD20 is specially designed for diving activities, but also serves as a general purpose torch thanks to built-in overheat protection that controls the flashlights body temperature out of the water. This diving flashlight delivers integrated 1000-lumen white light and 105-lumen red light beams. The rotating magnetic ring mode selector is easy and convenient to operate with one hand. 100-metre waterproofing frees your underwater exploration with a large safety margin.

    Fenix SD20 performance:

    White light: High: 1000 lumens (3h, 172m beam), Low: 400 lumens (7h 30 min, 108m beam)
    Red light: 105 lumens (8h)

    Battery Level Indicator
    When rotating the magnetic ring to the battery level output, there are three states: red light constant-on displays sufficient power level, red light slow flash displays poor battery level, red light quick flash displays critical battery level.

    Low-voltage Protection
    1. When the light works at High output, if the detected voltage is lower than the preset voltage of 6.2V, the output will automatically downshift to 400 Lumens.
    2. When the light works at High or Low output, if the detected voltage is lower than the preset voltage of 6.0V, the output will automatically downshift to 100 Lumens.
    3. When the light works at the Red light mode, if the detected voltage is lower than the preset voltage of 6.0V, the output will automatically downshift to 25 Lumens.

    Intelligent Over-heat Protection
    The light will accumulate a lot of heat when it is working at High output. When the light is overheated internally up to 65c or above, the flashlight will automatically adjust the output to prevent the light from overheating.

    For full product details please refer to the user manual in the images area.


    Specification
    ModelSD20
    Battery Type18650
    Battery Quantity2
    Additional Battery TypePlease see user manual in images area
    LED TypeCree XM-L2 U2 White and XQ-E Red LEDs
    Output/RuntimeHigh: 1000 lumens (3 hrs), Low: 400 lumens (7 hrs 30 mins), Red: 105 lumens (8 hrs)
    Flashing ModesRed
    Max Beam Distance172m
    ReflectorSmooth aluminium reflector
    Lens TypeToughened Ultra - Clear glass lens with anti - reflective coating
    Switch TypeRotating magnetic ring
    ConstructionDurable aircraft-grade aluminum
    FinishPremium Type III hard-anodized anti-abrasive finish
    Tail StandNo
    Pocket ClipNo
    WaterproofingIPX-8, 100m depth
    Dimensions / WeightPlease see user manual in images area
    Further InfoBattery connector allows the use of two flat top batteries
    Package & Contents

    Retail packaged Fenix SD20 Diving Light
    Lanyard
    Battery connector (for flat top cells)
    Spare O-ring
    Instruction manual
    Warranty card
    4 x CR123 battery (retail customers only)

    For commercial orders and large purchases, contact us at 02921157162, or